Gramazio Kohler Research
News
Teaching
Research
Projects
Publications
About
Team
Open Positions
Contact
FAA Revisited
Semiramis
Collaborative Constructions
Circularity Park
Touch Wood
Acoustic Panel System
OpenHouse
Research as Architecture - A Laboratory for Houses, Homes and Robots
IRoP: Interactive Robotic Plastering
Immersive Design Lab
Clay Rotunda
Designlabor
Augmented Bricklaying
Future Tree
DFAB HOUSE
Augmented Acoustics
Rock Print Pavilion
Villa Bernasconi
Robotic Pavilion
Robotic Cosmogony
Sisyphus
Gramazio Kohler Retrospective
Mutations-Créations / Imprimer le monde
Hello, Robot
Reinforce Expose
Robotic Fabrication Laboratory
The Sequential Roof
Rock Print
Iridescence Print
Robotic Foldings
Flight Assembled Architecture
The Endless Wall
Stratifications
The Catenary Pavilion
Pike Loop
The Stacked Pavilion
Architonic Concept Space
Structural Oscillations
R-O-B
Superwood
Winery Gantenbein


CantiBox, ETH Zurich, 2021-2022
CantiBox is a robotically assembled structure representing a novel application of the design and automatic assembly of interlocking timber-to-timber connections. It is composed of 60 linear elements of solid spruce with a cross-section of 10 by 10 cm interconnected through bespoke half-lap joints. The structure consists of three units of 20 elements each: two lateral boxes sitting on the ground and a cantilevering central box. The interweaving logic of the structure allows the use of exclusively interlocking timber-to-timber connections, with only four external fasteners per unit to prevent disassembly.

Each unit contains 36 customized lap joints that are designed based on the static method of limit analysis, based on plastic theory. In an interlocking connection, forces are transferred between the elements by means of compressed contact areas. The capacity depends on two parameters: the contact surface's size and the associated strength value. The contact surface strength indicates the maximum stress that a surface can withstand, while the strength value is calculated thanks to stress fields and timber yield conditions and then validated through mechanical tests. The capacity of the connection is determined by defining the possible contact areas between the timber elements and their resistances, as well as by transferring the plastic redistribution of the force on the contact surfaces. This approach allows geometric adjustments of each joint according to different loading conditions. The conventional half-lap joint connection is, therefore, customized - whenever necessary - to adapt its capacity to internal stresses.

The three units are assembled independently through a fully automatic process, which uses a set of distributed robotic clamps and screwdrivers to operate in collaboration with an industrial robotic arm. This approach enables the automated assembly of bespoke timber structures directly in 3D as opposed to planar sub-assemblies. At the same time, it overcomes well-known challenges in robotic timber joint assembly: large assembly force to overcome friction, simultaneous assembly of multiple joints, as well as to ensure local and global accuracy. To accommodate the bespoke design, the task and motion planning of the robotic process is performed automatically.

CantiBox demonstrates two cutting-edge approaches for jointed timber structures. First is the static method of limit analysis for interlocking timber-to-timber connection design. Second is the use of distributed robotic tools to achieve a fully automatic assembly process. Indeed, each of the three units is directly constructed in space. Both technologies complete a critical knowledge gap that enables bespoke design and construction of spatial timber structures. Their flexibility to accommodate custom design can be witnessed in the use of the interweaving logic to create a reciprocal network.

Credits:
Gramazio Kohler Research, ETH Zurich
Victor Pok Yin Leung (project lead), Aleksandra Anna Apolinarska, Lauren Vasey, Gonzalo Casas

In collaboration with: Chair of Structural Design, ETH Zurich (Davide Tanadini, Giulia Boller), Professorship of Structural Design, TU Munich (Prof. Dr. Pierluigi D’Acunto), Digital Structures, MIT Boston (Yijiang Huang)

Selected Experts: Prof. Dr. Agatha Koller, Marco Rossi (ILT, OST, Rapperswil), Caelan Garrett (NVIDIA Seattle Robotics Research Lab, USA)

Support:Philippe Fleischmann and Michael Lyrenmann (NCCR Digital Fabrication, ETH Zurich), Rodrigo Mendoza Diaz, Dario Quaglia, Valentin Ribi, Louis Strologo and Leandro Nahuel Barroso (ETH Zurich), Luca Steiner (ILT, OST, Rapperswil)

Selected contractor: AUER Holzbau
Copyright 2023, Gramazio Kohler Research, ETH Zurich, Switzerland
Gramazio Kohler Research
Chair of Architecture and Digital Fabrication
ETH Zürich HIB E 43
Stefano-Franscini Platz 1 / CH-8093 Zurich

+41 44 633 49 06
Follow us on:
Vimeo | Instagram